Use Instructions For In Furrow Application (CDA)


Systemic Nitrogen Fixation

In the Right Place at the Right Time.

Instructions for use of in-furrow application of Envita in Canada



Envita® is a nitrogen-fixing solution that allows you to take control of nitrogen utilization on your farm. Applied in-furrow or as a foliar spray, Envita enables cells throughout the plant, including foliage and roots, to fix their own nitrogen and fill the nitrogen gap between crop required and crop available nitrogen. In order to get the best results with Envita, follow these instructions.

Envita concentrate comes packaged in a multi-pack box of 4 x 3.78L (1.0 gallon) jugs. Each 3.78L jug of Envita will treat 16.2 ha (40 acres) when diluted and applied in-furrow.  Follow the instructions below to dilute, mix, and apply Envita.

Envita fits most fertility programs and is easy to use. If you are considering an application method that is not covered below, please contact us at or 1-877-ENVITA1 (1-877-368-4821) for support.


In-Furrow Mixing Instructions:

  1. Shake each 1-gallon (3.78L) Envita jug thoroughly for a minimum of 30 seconds before mixing.
  2. Dilute Envita concentrate into a minimum of 99 parts water and 1 part Envita. Rinse the Envita bottle with water and add that rinse into the mix tank. If wanting to use less water, we can discuss how to optimize that. Please contact us at or 1-877-ENVITA1 (1-877-368-4821)
  3. Add 23.5 L of diluted Envita mix from step 2 into your tank for every hectare to be treated. Apply Envita mixture in-furrow directly onto the seed at planting.
  4. If applying additional products with Envita: Up to 28.1 L/ha (3 gal/ac) of other compatible products may be mixed with Envita in the tank to be applied in-furrow. However, NEVER combine undiluted Envita with undiluted fertilizer products at any stage.


Recommended mix order when mixing Envita with other products:


Recommended Option A:

Recommended Option B:

NEVER MIX UNDILUTED ENVITA WITH UNDILUTED FERTILIZER. The following mixing order is NOT recommended.

Crop Specific Recommendations:


In order to get the best results with Envita, follow these practices:

  • Do not freeze Envita.Store and keep Envita out of extreme hot or cold temperatures, ideally out of the sun, in cooler conditions. Large temperature fluctuations should be avoided.
  • Do not open the bottle of Envita before you intend to apply it.
  • Envita MUST be applied in-furrow directly onto the seed.Applying as a 2x2 placement may not yield desired results.
  • Follow Envita dilution instructions and be sure to mix product in the order described previously – failure to dilute Envita or mixing in the incorrect order may impact product performance.
  • Envita is compatible with many tank mix products. Contact your Envita representative or Azotic North America if you have any questions regarding compatibility of specific tank mix products.
  • Envita is compatible with most pop-up/starter fertilizers. Before mixing, conduct a jar test to assess physical compatibility.
  • Do not mix Envita directly with UAN in tank mixes.
  • If mixing with fertilizer, it is recommended that low salt-index fertilizers (SI <20) be used and the final concentrations minimized for best Envita performance. Apply on farm within 6 hrs of mixing Envita with starter fertilizer

For application variations or other crops or if you have further questions, please contact us at or call 1-877-ENVITA1 (1-877-368-4821).


Downloadable PDF:

English: 2022 Envita In Furrow Application Instructions

French: 2022 Envita In Furrow Application Instructions


Downloadable Label PDF:

EN: Envita Label CA (EN)

FR: Envita Label CA (FR)