Use Instructions For Foliar Application (CDA)

Envita_Syngenta_PNG

Systemic Nitrogen Fixation

In the Right Place at the Right Time.

Instructions for use of foliar application of Envita in Canada

 

 

Envita® is a nitrogen-fixing solution that allows you to take control of nitrogen utilization on your farm. Applied in-furrow or as a foliar spray, Envita enables cells throughout the plant, including foliage and roots, to fix their own nitrogen and fill the nitrogen gap between crop required and crop available nitrogen. In order to get the best results with Envita, follow these practices.

Envita concentrate comes packaged in a multi-pack box of 4 x 3.78 L (1.0 gallon) jugs. Each jug of Envita will cover 40 acres (16.2 ha) when applied as a foliar application. Minimum water volume is 10 gallons/ac (100 L/ha).

Envita fits most fertility programs and is easy to use. If you are considering an application method that is not covered below, please contact us at info@envitasupport.com or 1-877-ENVITA1 (1-877-368-4821) for support.

Envita is compatible for tank-mixing with most crop protection products. Some herbicides with 2,4-D or MCPA have antibacterial effects and should be used with caution. To avoid compatibility issues, add Envita to the tank last and apply as quickly as possible.

 

Envita Mixing Instructions: 

  1. Shake each 1-gallon (3.78L) Envita jug thoroughly for a minimum of 30 seconds before mixing.
  2. If using Envita on its own, apply 95 ml/ac in a minimum of 10 gal/ac volume of water (235 ml/ha in a minimum 100 L/ha volume of water).
  3. If using Envita alone, it is recommended that a non-ionic surfactant be mixed with the spray solution at a minimum rate of 0.1% v/v.
  4. If mixing with a crop protection product, follow the label advice for spray adjuvants.
  5. If mixing with a pesticide, apply 95ml/ac (235 ml/ha) Envita and use 10 gal/ac or more total volume.
    • Before mixing with any agrichemicals (e.g. a herbicide), check for physical compatibility by doing a jar test.
    • Do not mix concentrated Envita with concentrated agrichemicals. Dilute Envita or agrichemicals with water first.
    • Perform mixes immediately before use. Do not allow mix to sit in the tank.

Mix in the following order: 

Option A:  1) Water 2) Envita 3) Agrichemicals 4) Spray adjuvants (if applicable).

Option B:  1) Water 2) Agrichemicals 3) Envita  4) Spray adjuvants (if applicable).

 

See mixing volume examples in Table 1 below.

* Recommend using maximum carrier volume allowed by agrichemical label with minimum 10 gal/ac recommended. Do not exceed maximum carrier volume allowed by agrichemical label.

 

Crop Specific Recommendations:

*If the primary timing is missed, Envita offers benefits at other timings that suit your management practices.

 

In order to get the best results with Envita, follow these practices.

  • Apply either a) in the morning before drying time is accelerated OR b) later afternoon, after the
    heat of the day.
  • Avoid spraying in temperatures above 25°C.
  • Works with most spray systems.
  • Do not apply if a rain event is likely in 2 hours after applying Envita.
  • Do not freeze Envita. Store and keep Envita out of extreme hot or cold temperatures, ideally out of the sun, in cooler conditions. Large temperature fluctuations should be avoided.

For other crops, timing or if you have further application questions, please contact us at info@envitasupport.com or call 1-877-ENVITA1 (1-877-368-4821).

Downloadable PDF:

English: 2022 Envita Foliar Application Instructions (EN)

French: 2022 Envita Foliar Application Instructions (FR)

 

Downloadable Label PDF:

EN: Envita Label CA (EN)

FR: Envita Label CA (FR)